Pages

Monday, June 16, 2008

Finding a home on rent in Pune

Social

One can't imagine how much effort one need to take for getting a good 3-4 room residential flat on rent in city like Pune or Mumbai. Indian cities are getting denser and denser with major population moving from village to urban area.


Day 1 :

I was full of enthusiasm to get a proper broker/agent and hence proper flat in area I wished. Yesterday, I ad searched a lot on Internet to get rented flat in Pune. I found magic bricks and other sites helpful to get contact info of agent & other flat owner. While leaving office I made a long list with mobile numbers & names of brokers who can help me in last moment

I moved from Mumbai in early morning (in my case its 9.00 am). Got a travels vehicle of Konduskar (famous tours & travels in Maharashtra) with a window sit wort Rs 280/- . Person sitting next to me : Mr Satyajit was cool dude like me. He wasn't feeling well. Had fever and improper health. But was good in chit-chatting while traveling. We shared good amount of each others domain knowledge. He was working in garment industry working for brands like Zodiac & Pentloon. Shared good memories of interests, carriers, society, fashion and fun.

By the grace of rain fall and mild traffic conditions I reached Pune at 1.00 o'clock in noon. First thing I targeted was Shivaji nagar. Met the first person in the list Mr Rajesh, a typical Punekar in early 40's , blackish complexion with very strong voice and commitment.


Questions asked for searching :

Name :

1BHK or 2 BHK (bedroom, hall & Kitchen)

who's living family/bachelors :

No. family members :

Who/ What they do:

Is family vegetarian or non-veggi :

Rent budget :

When to take keys and give token money :

I felt very embarrassing when he asked me my surname & cast, here comes the bad human nature in Pune. More due to some Brahman community in Pune.

Pune has been well known for culprits who prefer to see surname (which very good indication of the somebodies cast in India). Thats what is in NAME and its not what great Shakasphere had said, “ Whats in name”, rather I would say its all revolves around your name.

Let me proceed from cyclone of religion and cast ism. Mr Gosavi shown me few flats around the area, varying from 8K to 13K. I like one of them, but still rent around was more as compare to my budget. The day went on traveling and contacting new people/ agents and finally ended with nothing decided at last moment.

At 9.00 pm, I was dropped to Kothrud by Mr Gosavi. Thanks a lot for the same. I met my friend Mangesh, Satyawan & Nilesh, who were waiting for me eagerly to have party meet. As usually we celebrate with toss of pegs of Royal Stag. I don't remember when I felt sleepy and went off. I remember I had good time chatting with Nilesh. He really explained how he searched his girl for marriage. We shared very good moments of our last few bachelor parties. I also had talk with his fiancee. I shared very core memories my & Nilesh friendship with her. She understood me very well. Lucky chap Nilya. With my best wishes. Just before sleeping, I had very serious talk with Mangesh about life and stuff like that. I can't recollect such thoughts & chats again. That was pretty volatile. Anyways enjoyed the evening after very hectic day.


Day 2 :

Again wake up early in morning at 8.30 am. Met my cousin Mr Arjun, nick named Bandu daji (big brother). He introduced me very interesting character called Mr Ashok. A typical Beed kar, very talkative, pheku (who lies many things), a aspirational MBA passout from Bharati Vidyapith (as he said, I still doubt whether he had or not) but works as a sales person for Idea Tel com. He had good contat with other brokers & friends around the place.

Day went on calling other brokers, looking few more new locations. Finally decided one near Bharati Vidyapith on Satara road.

Friends, by the end of the day I was drained out of energy. Bandu daji arranged fish in evening. I took lot of time in filtering out the thorns from fins of fish. Slept in midnight. It was Sunday night. I was suppose to be in office on Monday morning.


Day 3:

Wake up too early at 7.30 am. Got ready to go Mumbai. But plan changes as we were still not finished with perfect place to stay in Pune. I was suppose to be in office, took urgent leave for a day. Thanks my company provide such facility. I called up one more broker.

I was badly screwed with the rain and conditions. Finally I fixed a place in Upper -Sukhsagar area with help of Bandu daji..

It was overall good experience rather adventure i would say...


Worst part of it was, when the agent ask from surname,cast, veg/non-veg like things..I don't think anybody 'll like such things. Would you still say India is a non-racial, cast independent country?
Best part is, many people help you around without any money expectations.

Thank a ton to all...

Thursday, June 5, 2008

Stay Connected to the world

These days, it's all about staying connected. Sometimes you're stuck at your desk and you need to ask someone an urgent question. Sometimes you're on unfamiliar turf and you need a guide. This month, we look at an improved instant messenger and a Wi-Fi service that helps you find local businesses from your laptop or mobile. Both are as free as air.

nimbuzz
twitter
ebuddy
meebo
yahoo online chat for mobile


The Loki Toolbar allows you to do location-based search and navigation right from your browser. The Toolbar combines GPS-like location, local search and one-button access to location-based content, making the Internet revolve around you

www.loki.com

How media going more n more vulgar

Can you imagine kids watch (don't read) English newspapers to see sexy babes..
I could remember 6-7 years before, things were different. We could hardly see some really vulgar stuff in any news paper. One has to go n get something very relevant magazine or paper.

Pic from TOI : date 5 June '08 , Mumbai News Paper release, Second-last page of main print.

On daily basis I can see at least 2-3 such semi-nude pics. This is good enough to ignite small minds.

I would say : rather then just blaming TOI or some other news agency. We should think of how society
is liking.

Its not only TOI, rather we as nation should think to change the way people think

Don't you think some portion of blame also come to us. After all its your child who is gonna suffer.


Pls think why something is so?
comments Welcome !!!

Wednesday, May 28, 2008

My Mobile surfing

I Hope this 'll be of great help when you are alone at some lonely place. You can go ahead and get in touch with help of WAP portal which are helping mobile user in great extend. I feel it's more like a Internet of Mobile world, which is growing like anything.


Google http://wap.google.com/
Google http://mobile.google.com/
Gmail - http://www.nodrm.com/gmail
Google Maps http://wap.mgmaps.com/
Yahoo http://us.m.yahoo.com/?tsrc=rawfront
Yahoo - http://wap.yahoo.com
Yahoo Messenger - http://mm.yahoo.com
Rediff - http://mobile.rediff.com
Cellfun http://wap.cellufun.com/
GCalSync http://wap.gcalsync.com/
WAP community http://www.wap.com/
Mobiile Content http://wap.mobile9.com
Mobile Softwares Download wap.getjar.com
Send Email Anonymously - http://webcab.de/sm.wml#WSM
Live Cricket Scores - http://wap.ananova.com/sport
Dictionary - http://dictionary.reference.com/wml/#dict
Free Greeting cards - http://www.wapcardz.com
Hotmail - http://mobile.msn.com
MSN Messenger - http://mob.e-messenger.net
Symbian Softwares - http://wap.my-symbian.com/wap
Pocket Doctor - http://wap.pocketdoctor.co.uk
BBC UK - http://bbc.co.uk/mobile
Browser Spy - http://wap.gemal.dk
BSE India - http://wap.bseindia.com
Check Domain Name - http://wap.checkdomain.com

AOL wap.aol.com/
JIMM wap.jimm.org/
USA Today wap.usatoday.com
Swiss Info wap.swissinfo.org/
MLB wap.mlb.com/
http://www.getjar.com/software/
http://www.mobile9.com/

And list goes on increasing...

Monday, March 31, 2008

Squid on Linux FC6

Make a simple Proxy server configuration using squid...

Best control over internet access in NAT / Cafe or for home usage on multiple computers..

Here are some steps :
yum -y install squid

Open config file :
vi /etc/squid/squid.conf

Most of setting are done as default + lot of commented advance config

Your squid.conf abstractly looks like :

================================================================
http_port 3128
hierarchy_stoplist cgi-bin ?
acl QUERY urlpath_regex cgi-bin \?
cache deny QUERY

acl apache rep_header Server ^Apache
broken_vary_encoding allow apache

#logging details
access_log /var/log/squid/access.log squid

refresh_pattern ^ftp: 1440 20% 10080
refresh_pattern ^gopher: 1440 0% 1440
refresh_pattern . 0 20% 4320

acl all src 0.0.0.0/0.0.0.0
acl manager proto cache_object
acl localhost src 127.0.0.1/255.255.255.255
acl to_localhost dst 127.0.0.0/8
acl SSL_ports port 443
acl CONNECT method CONNECT

http_access allow manager localhost
http_access deny manager
http_access deny !Safe_ports
http_access deny CONNECT !SSL_ports

acl our_networks src 10.10.10.0/24 172.16.12.0/24
http_access allow our_networks

http_access allow localhost
http_access deny all

http_reply_access allow all

icp_access allow all
coredump_dir /var/spool/squid
================================================================

We can add/remove network series by adding ==>

acl our_networks src 10.10.10.0/24 172.16.12.0/24
http_access allow our_networks


Single IP access can be manipulated acl list

Most important thing is : complete logging. (Not available in case of NAT)
We can monitor it to produce Artificial intenllegence

Now start squid ::::::::
service squid start

Set Proxy server IP & port to browser settings .. its working

Monday, March 10, 2008

Internet on FC6 linux with Airtel GPRS DKU2.0


First, you got to install wvdial if not present on your linux system.( Comes with OS on FC, Redhat and CentOS)

u can try

#yum install wvdial

I used Airtel as GPRS carriers with Nokia N72 phone on Dell D520 Laptop running with FC6 Linux

username & password is taken as service provider. Other setting same as given below

File /etc/wvdial.conf :
[root@ ~]# more /etc/wvdial.conf
[Modem0]
Modem= /dev/ttyACM0
Baud= 115200
SetVolume= 0
DialCommand= ATDT
FlowControl= Hardware(CRTSCTS)
[Dialer gprs]
Username=airtelgprs.com
Password=airtelgprs.com
Phone=*99***1#
Stupid Mode= 1
Inherits= Modem0

[root@mahendra ~]# wvdial gprs
--> WvDial: Internet dialer version 1.54.0
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
~[7f]}#@!}!} } }2}#}$@#}!}$}%\}"}&} }*} } g}%~
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Mon Mar 10 21:28:06 2008
--> pid of pppd: 12348
--> Using interface ppp0
--> pppd: s.com
--> pppd: s.com
--> pppd: s.com
--> pppd: s.com
--> local IP address 117.98.48.238
--> pppd: s.com
--> remote IP address 10.6.6.6
--> pppd: s.com
--> primary DNS address 202.56.230.5
--> pppd: s.com
--> secondary DNS address 202.56.240.5
--> pppd: s.com

:) Now you are connected,


[root@ ~]# more /etc/resolv.conf
#airtel gprs access DNS IPs
nameserver 202.56.230.5
nameserver 202.56.240.5


Now check

##ifconfig


add p-t-p IP as default gateway to system using :

route add default gw <-IP->

Dear you can browse internet from your favorite browser.

Enjoy.

Tuesday, February 19, 2008

J2ME+Polish+Netbeans+Linux Is possible ...

Dear all,

If somebody doubt "How linux can be used for proffesional J2ME development?" But , I would say "Yes, Its very much feasible"

Netbeans & Mobility Pack Instalation :

First of all get your copy of Netbeans mobility pack.

Get free CD from Netbean containing JDK, Latest Netbeans ( IDE & Mobility plugin )
http://www.netbeans.org/about/media.html
OR
download mobility pack & Netbeans IDE

wtk 2.2 download for Linux - Worked great with FC6 ;)
http://java.sun.com/products/sjwtoolkit/download-2_2.html

Latest wtk and jdk are available :
http://java.sun.com/javame/downloads/index.jsp

If you dont like to use emulator provided by wtk, we can also use microemulator(see on source forge)

J2me-Polish integration with Netbeans

Get j2me-polish latest jar , run it using
java -jar j2me-polish.jar

start a new installation procedure for j2me-polish

Follow below steps to make polish working with netbeans :

For integrating J2ME Polish with NetBeans 4.0 create a new project and copy the sample project from ${polish.home}/sample into your new project with a filemanager.
Rightclick the build.xml and choose "Run Target" > "j2mepolish" for running the example.
• Create a new project:
Go to "File" >"New Project" and select "Mobile" >"Mobile Application"
as your project type. Give the project any name and choose any folder as the
project's home. Deselect the "Create Hello MIDlet"option and select "Finish" to create the
project.
• Copy the sample project: Navigate to the "${polish.home}/sample" directory with your filemanager (e.g. Windows Explorer on Windows or Finder on Mac OS X). Select the "resources", "resources2" and "src" folders as well as the "build.xml" file and copy all into the folder of your NetBeans project. Overwrite any existing files.
• Return to NetBeans, rightclick
your new project in the "Projects" view and select "Refresh
Folders". You can now view the sample application in the "de.enough.polish.example" package.
• Right click your project again and select "Properties". Go to "Build" and select "Libraries and
Resources". Select "Add Jar/Zip" and add the "${polish.home}/import/enoughj2mepolishclient.jar" file to your project.
• Now switch to the "Files" view and right click the "build.xml" file. Select "Run Target" >
"Advanced". Write "test, j2mepolish" in the following dialog, so that the "test" target is executed first, followed by the "j2mepolish" target. J2ME Polish now executes and starts the WTK emulator



I hope , once you get above things installed , we can proceed for any kind of development of J2ME..

:)

Enjoy.

Wednesday, February 13, 2008

Reliance Huwai - Data Card on FC6 Linux


To configure Reliance data card (Huwai) on Dell D520 with FC6, hope it works in same manner on other laptops and linux too

Just follow below steps after adding data card inside slot.


After inserting data card see
# cat /proc/bus/usb/devices

.....
.....
T: Bus=02 Lev=01 Prnt=01 Port=05 Cnt=02 Dev#= 4 Spd=12 MxCh= 0
D: Ver= 1.01 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=16 #Cfgs= 1
P: Vendor=12d1 ProdID=1001 Rev= 0.00
S: Manufacturer=Huawei Technologies
S: Product=Huawei Mobile
S: SerialNumber=HUAWEI EC3X1
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=pl2303
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
E: Ad=8a(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=0b(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I: If#= 1 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=pl2303
E: Ad=83(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=06(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms

If you cant see, Use grep

Now modprobe the driver

Code:
# modprobe usbserial vendor=0x12d1 product=0x1001
Should get something like this with dmesg
Code:
# dmesg
[ 2315.412106] usbcore: registered new interface driver usbserial
[ 2315.412508] drivers/usb/serial/usb-serial.c: USB Serial support registered for generic
[ 2315.461938] usbcore: registered new interface driver usbserial_generic
[ 2315.461945] drivers/usb/serial/usb-serial.c: USB Serial Driver core
[ 2315.480382] drivers/usb/serial/usb-serial.c: USB Serial support registered for pl2303
[ 2315.480414] pl2303 2-6:1.0: pl2303 converter detected
[ 2315.480608] usb 2-6: pl2303 converter now attached to ttyUSB0
[ 2315.480620] pl2303 2-6:1.1: pl2303 converter detected
[ 2315.480691] usb 2-6: pl2303 converter now attached to ttyUSB1

Now edit your wvdial.conf file

Code
# vi /etc/wvdial.conf
[Modem0]
Modem = /dev/ttyUSB0
Baud = 115200
SetVolume = 0
Dial Command = ATDT
Init1 = ATZ
FlowControl = Hardware (CRTSCTS)
[Dialer cdma]
Username = You Phone Number Here
Password = Your Password ... usually same as your phone number
Phone = #777
Stupid Mode = 1
Inherits = Modem0


In my case , it looks like this


#more /etc/wvdial.conf
[Modem0]
Modem= /dev/ttyUSB0
Baud= 115200
SetVolume= 0
DialCommand= ATDT
FlowControl= Hardware(CRTSCTS)
[Dialer cdma]
Username=
Password=

Phone=#777
Stupid Mode= 1
Inherits= Modem0


One more thing, add nameserver to
/etc/resolv.conf

[root@localhost ~]# more /etc/resolv.conf
# generated by NetworkManager, do not edit!
nameserver 202.138.103.100
nameserver 202.138.97.193
nameserver 127.0.0.1




Code:
# wvdial cdma
--> WvDial: Internet dialer version 1.56
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Modem initialized.
--> Sending: ATDT#777
--> Waiting for carrier.
ATDT#777
CONNECT 230400
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Sat Mar 3 22:55:20 2007
--> Pid of pppd: 24314
--> Using interface ppp0
--> local IP address 220.226.50.126
--> remote IP address 97.239.2.10
--> primary DNS address 202.138.103.100
--> secondary DNS address 202.138.96.2

Thats it ... you are now connected

U can now check ifconfig

[root@localhost ~]# ifconfig
eth0 Link encap:Ethernet HWaddr 00:19:B9:81:69:DE
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:181361 errors:0 dropped:0 overruns:0 frame:0
TX packets:17751 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:19484952 (18.5 MiB) TX bytes:1573958 (1.5 MiB)
Interrupt:17

eth1 Link encap:Ethernet HWaddr 00:1B:77:81:44:FE
inet addr:172.16.13.81 Bcast:172.16.13.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:188454 errors:0 dropped:4871 overruns:0 frame:0
TX packets:21426 errors:0 dropped:0 overruns:0 carrier:685
collisions:0 txqueuelen:1000
RX bytes:16911463 (16.1 MiB) TX bytes:2128728 (2.0 MiB)
Interrupt:17 Base address:0xe000 Memory:efdff000-efdfffff

lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:3124 errors:0 dropped:0 overruns:0 frame:0
TX packets:3124 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:4018312 (3.8 MiB) TX bytes:4018312 (3.8 MiB)

ppp0 Link encap:Point-to-Point Protocol
inet addr:220.224.115.210 P-t-P:220.224.134.73 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:828 errors:1 dropped:0 overruns:0 frame:0
TX packets:1151 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:421748 (411.8 KiB) TX bytes:119826 (117.0 KiB)

ppp0 is ur n/w connection

Once you see above o/p of # ifconfig

Add default gateway as below
#route add default gw
220.224.134.73 netmask 0.0.0.0

Now We can see

[root@localhost ~]# route -n
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
220.224.134.73 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0
172.16.13.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1
0.0.0.0 220.224.134.73 0.0.0.0 UG 0 0 0 ppp0

For more info
http://fedorahacks.com/node/7
http://www.linuxquestions.org/questions/linux-laptop-and-handheld-25/configuring-datacard-on-my-laptop-601597/
http://www.rimweb.in/forums/lofiversion/index.php/f4.html
http://www.linuxquestions.org/questions/linux-laptop-and-handheld-25/configuring-datacard-on-my-laptop-601597/

Wireless on Dell D520 with Linux-FC6

Dear FC users,

Please refer to
http://forums.fedoraforum.org/showthread.php?t=148278
follow steps to get your wireless working.

file /etc/sysconfig/network-scripts/ifcfg-eth1
# Please read /usr/share/doc/initscripts-*/sysconfig.txt
# for the documentation of these parameters.
IPV6INIT=no
ONBOOT=yes
TYPE=Wireless
DEVICE=eth1
HWADDR=00:1b:77:81:44:fe
#BOOTPROTO=none
BOOTPROTO=dhcp
ESSID=
RATE=Auto
MODE=Managed
CHANNEL=1
USERCTL=yes
PEERDNS=yes

For Wired connection, you may be having something like this at eth0
[root@localhost network-scripts]# more ifcfg-eth0
# Broadcom Corporation BCM4401-B0 100Base-TX
DEVICE=eth0
BOOTPROTO=dhcp
HWADDR=00:19:B9:81:69:DE
ONBOOT=yes
TYPE=Ethernet

Start NetworkManager in background, it automatically searches and get the available networks in range.
command NetworkManager

Meanwhile also monitor /var/log/message
You 'll be asked for some password/key, just put 123 or something.
I got it working on my machine.

For winamp & Other Media Plyers on FC-6

Install Media player
Xmms:
yum resolvedep xmms
yum install xmms xmms-check xmms-plugin
yum -y install xmms xmms-mp3 xmms-faad2 gstreamer-plugins-ugly libmad libid3tag

Xine :
yum -y install xine xine-lib xine-skins

Vlc Player :
yum -y install videolan-client

command xmms will play mp3 for you.



I feel above information 'll be helpful for you to configure Wireless.
Thanks.

Cheers,